• Sometimes It’s The Little Things
    Technology

    Sometimes It’s The Little Things

    I had one of those why-didn’t-I-think-of-it moments this week, reading this article about multiplexing I2C on the ESP32 microcontroller. The idea is so good, and so simple, that it’s almost silly that it’s not standard hacker practice. And above all, it actually helps solve a problem that I’ve got. This is why I read Hackaday every day. I2C is great in that it lets you connect up multiple devices to a pair of wires using a very bus architecture. Every device has its own address, the host calls them out, and hopefully all other devices keep quiet while just the right one responds. But what happens when you want to…

    Comments Off on Sometimes It’s The Little Things
  • Streaming Deck Removes Need For Dedicated Hardware
    Technology

    Streaming Deck Removes Need For Dedicated Hardware

    Streaming content online has never been more popular than it is now, from YouTube to Twitch there are all kinds of creators around with interesting streams across a wide spectrum of interests. With that gold rush comes plenty of people selling figurative shovels as well, with audio mixing gear, high-quality web cams, and dedicated devices for controlling all of this technology. Often these devices take the form of a tablet-like device, but [Lenochxd] thinks that any tablet ought to be able to perform this task without needing dedicated, often proprietary, hardware. The solution offered here is called WebDeck, an application written in Flask that turns essentially any device with a…

    Comments Off on Streaming Deck Removes Need For Dedicated Hardware
  • Brushless ESC Becomes Dual-Motor Brushed ESC With A Few Changes
    Technology

    Brushless ESC Becomes Dual-Motor Brushed ESC With A Few Changes

    What is a brushless ESC, really? Well, generally, it’s usually a microcontroller with a whole lot of power transistors hanging off it to drive three phases of brushless motor coils. [Frank Zhao] realised that with a little reprogramming, you could simply use a brushless ESC to independently run two brushed motors. Thus, he whipped up a custom firmware for various AM32-compatible ESCs to do just that. The idea of the project is to enable a single lightweight ESC to run two brushed motors for combat robots. Dual-motor brushed ESCs can be hard to find and expensive, whereas single-motor brushless ESCs are readily available. The trick is to wire up the two…

    Comments Off on Brushless ESC Becomes Dual-Motor Brushed ESC With A Few Changes
  • Pi 5 And SDR Team Up For A Digital Scanner You Can Actually Afford
    Technology

    Pi 5 And SDR Team Up For A Digital Scanner You Can Actually Afford

    Listening to police and fire calls used to be a pretty simple proposition: buy a scanner, punch in some frequencies — or if you’re old enough, buy the right crystals — and you’re off to the races. It was a pretty cheap and easy hobby, all things considered. But progress marches on, and with it came things like trunking radio and digital modulation, requiring ever more sophisticated scanners, often commanding eye-watering prices. Having had enough of that, [Top DNG] decided to roll his own digital trunking scanner on the cheap. The first video below is a brief intro to the receiver based on the combination of an RTL-SDR dongle and…

    Comments Off on Pi 5 And SDR Team Up For A Digital Scanner You Can Actually Afford
  • An Apple ][ With A Pendulum
    Technology

    An Apple ][ With A Pendulum

    Clocks are a favourite project here, and we can say we’ve seen all conceivable types over the years. Just a software clock on a retrocomputer perhaps isn’t the coolest among them, but [Willem van der Jagt ]’s Apple][ clock has a little bit extra. It takes its time reference from a real pendulum, on an antique wall clock. A proximity sensor next to a metal pendulum gives an easy way to generate a digital pulse on each pass, but leaves the question of how to transfer it to the computer. With computers of this age the circuitry is surprisingly simple, and in this case he’s sending an interrupt to the…

    Comments Off on An Apple ][ With A Pendulum
  • 3D Mouse With 3D Printed Flexures And PCB Coils
    Technology

    3D Mouse With 3D Printed Flexures And PCB Coils

    3D mice with six degrees of freedom (6DOF) motion are highly valued by professional CAD users. However, the entry-level versions typically cost upwards of $150 and are produced by a single manufacturer. [Colton Baldridge] has created the OS3M Mouse — an open source alternative using PCB coils and 3D printed flexures. The primary challenges in creating a 6DOF input device, similar to the 3Dconnexion Space Mouse, lie in developing a mechanical coupling that enables full range motion, and electronics capable of precisely and consistently measuring this motion. After several iterations of printed flexure combinations and trip down the finite element analysis (FEA) rabbit hole, [Colton] had a working single-piece mechanical…

    Comments Off on 3D Mouse With 3D Printed Flexures And PCB Coils