Hackaday Prize 2023: Ending 10 Years On A High Note

Hackaday Prize 2023: Ending 10 Years On A High Note

It’s a fact of life — all good things must eventually come to an end. The trick is not to focus so much on the chapter that’s closing, but look ahead to what comes next. This is precisely how the Hackaday Prize ended its incredible ten-year run on Saturday during Supercon.

This final year of the competition saw some of the most impressive entries we’ve ever had, leaving us with five exceptionally promising winners. These projects exemplify the qualities that the Hackaday Prize was designed to seek out and amplify and make a perfect capstone for this grand experiment in philanthropic hacking.

Grand Prize: Refreshable Braille Module

In the 1992 film Sneakers, a blind computer expert named [Whistler] uses a Braille terminal while cracking into several high-profile online services in a scene with about as much technical accuracy as you’d expect for a Hollywood depiction of hacking in the early ’90s. But they did get at least one thing right: computer-connected Braille “displays” have existed for decades.

Unfortunately, they remain monstrously expensive in the 21st century, to the point of being completely inaccessible for many. On the second-hand market, even outdated models can still command four-figure prices. To try and make this technology more accessible, Vijay spent years working on his Electromechanical Refreshable Braille Module. It leverages both off-the-shelf components and high-resolution 3D printing to provide six individually controlled pins that poke into the user’s fingers. Unlike commercial units, which use expensive piezo-electric actuated pins, his design utilizes an array of tiny electromagnets to rotate even tinier cams. Build up an array of 40 or even 80 of these modules, and you’ll be hacking along with [Whistler] in no time.

  • Second Place: Jumperless

    Jumperless by Kevin Santo Cappuccio is very much like your standard breadboard. But where it differs is that with this board, you don’t even need wires. Just plug in your components use the computer to make your connections virtually, and the array of crosspoint switches on the Jumperless will do the work for you.

  • The addition of RGB LEDs is a masterstroke, as it not only allows you to visualize the “wires” connecting each component but can communicate all sorts of information about the circuit’s performance.
  • Third Place: AutoDuct

    Daniel Porzig’s AutoDuct is designed to improve the efficiency of decentralized HVAC systems, specifically in apartments. Each unit has a humidity and temperature sensor, which allows the vent’s PIC32 microcontroller to increase or decrease airflow as necessary automatically.

  • This can put less burden on the building’s existing HVAC system with a relatively small investment. As an added bonus, the vent’s shutters can also help block unwanted noise from outside.
  • Fifth Place: BrailleRAP

    The BrailleRAP project seeks to provide a way to make printing Braille documents cheaper and more accessible. Using parts commonly found in desktop 3D printers, the open-source machine can emboss Braille into paper and even thin sheets of plastic and metal.

  • Inspired by the RepRap project, which helped drive down the cost of DIY 3D printers, an individual can assemble their own BrailleRAP for as little as $250 USD — compared to commercial offerings, which can easily cost ten times as much.
  • Protolabs Grant: AI Recycle Bin

    Looking to increase the amount of household refuse that gets recycled, Samuel Alexander designed this bin, which can automatically sort materials based on the sound they make when they’re tossed inside. After the sound has been classified by the bin’s machine learning algorithm, the segmented drum in the bottom of the unit rotates so the object falls into the appropriate compartment.

  • While such an elaborate device might not end up in everyone’s home, it offers value as an educational tool in public spaces.

Looking to the Future

The Hackaday Prize has had a phenomenal ten-year run, and while we’re sad that it has to end, we’re incredibly proud that it’s ending on such a high note.  Providing seed money to get a project like the Electromechanical Braille Display off the ground is an honor, and looking back over the years, the Prize has done that repeatedly.  We believe the Hackaday Prize has made a difference, and the last decade’s entrants are a testament to what small groups of determined hackers can get done.

In place of the Prize, we’ll be running more focused contests with the same goals of improving the world through our collective efforts. We’re still working out the details, but we’d like to continue to be able to encourage progress in the open-source hardware and software where it most matters. While this is the end of the Hackaday Prize as a giant monolith, our commitment to helping you to help us all isn’t going to change.